¡En Existencia!
Q126
.00
Q227
Módulo de relé de conmutación de 1 canal (2 unidades) Modbus RTU, placa de relés de entrada y salida con protección contra conexión inversa, comunicación RS485 TTL.
SKU: 77EEF02E14
¡En Existencia!
Pedido internacional
Oferta
Q 126
.00
Q 227
44% off
Este producto no se puede mezclar en la misma compra.
Para comprar este producto, primero completa la compra actual o elimina los productos que tienes en el carrito.
Beneficios
- On-board mature and stable 8bit MCU and MAX485 level conversion chips
- Output signal: relay switch signal, supports manual, flash-off and flash-off modes, the delay base of flash-off/flash-off is 0.1S, and the maximum flash-off/flash-off time can be set to be 0xFFFF * 0.1S = 6553.5S
- Onboard 1 Channel 5V,10A/250V AC 10A/30V DC relay, which can be continuously closed for 100,000 times, with diode laxative protection, short response time
- Communication protocol: supports standard Modbus RTU protocol, communication interface: supports RS485/TTL UART interface, communication baud rate: 4800/9600/19200, default 9600bps, supports power failure storage
- Optocoupler input signal range: DC3.3-30V (this input cannot be used for relay control); Power supply voltage: DC7-24V, supports DC seat/5.08mm terminal power supply, with input anti-reverse connection protection
Ver descripción del producto
Peso
0.23 libras
Garantía
Garantía por defectos. Máximo de 24 hrs después de la entrega.
SKU
77EEF02E14
The 1 Channel Modbus relay module is equipped with mature and stable 8-bit MCU and RS485 level communication chips. RS485 communication protocol using standard MODBUS RTU format can realize 1-way input signal detection and 1-way relay output, which can be used in digital quantity detection or power control occasions. Device address: range 1-255, default 255, support power-down saving Baud rate, input signal, relay status, equipment address can be read using software/instructions Onboard relay switch indicator
Ayuda
